Instruction manual

1. Components Overview
10
Table 1-6 Operating status in the specific LED indication mode (DUPLEX mode)
Nu
mb
er
Name
Type
Description
Details
(7)
LINK
Green/Orang
e LED
Indicates the operating
status of an SFP slot
Ethernet port.
Lit in green: Full duplex
#1
Lit in orange: Detecting line disturbances.
Off: Half duplex
#1
(8)
T/R
Green LED
(Not used)
Off
(9)
1-24
Green/Orang
e LED
Indicates the operating
status of a
10/100/1000BASE-T
Ethernet port.
Lit in green: Full duplex
#1
Lit in orange: Detecting line disturbances.
Off: Half duplex
#1
#1: These indications are valid after a link is established.
1.1.3 AX2430S-24T2X, AX2430S-24T2XD, AX3630S-24T2X, AX3630S-24T2XD
models
The AX2430S-24T2X, AX2430S-24T2XD, AX3630S-24T2X and AX3630S-24T2XD
models have the following hardware specifications:
 Ethernet 10/100/1000BASE-T ports: 24
 SFP slots: 4
 XFP slots: 2
 Memory card slot: 1
 CONSOLE port: 1
NOTE
Since Switch ports 1 to 4 are shared by the SFP slots and 10/100/1000BASE-T, the
ports cannot be assigned to both SFP and 10/100/1000BASE-T at the same time.
Configure each port so that it is either assigned to an SFP slot or as a
10/100/1000BASE-T port. (By default, ports 1 to 4 are SFP slots.)
For details about editing the configuration, see the Software Manual.
NOTE
For information about the SFPs and XFPs supported by the Switch, see 1.7.1 SFP
and 1.7.3 XFP.
(1) External appearance
Figure 1-8 Front view