Instruction manual

Safety Information
Safety-14
Handle memory cards and dummy memory cards carefully.
 When installing a memory card and a dummy memory card, do not force the card.
When removing a memory card, do not forcibly pull out the card if it is locked. Doing
so might damage the connector of the memory card slot.
 When moving the Switch, remove memory cards and dummy memory cards. If a
card is subjected to excessive force when the switch is moved, the connector of the
memory card slot might be damaged.
When the ACC LED is lit, do not remove the memory card or turn off the power.
 When the ACC LED on the front panel of the Switch is lit, the memory card is being
accessed. When a memory card is being accessed, do not remove the memory card
or turn off the power. Doing so might damage the memory card.
In addition, some commands require a certain amount of time after being entered to
finish accessing the card. Make sure that the memory card is no longer being
accessed before removing the card or turning off the power.
Do not attach any labels to a transceiver or a direct attach cable connector.
 A label attached to the transceiver or direct attach cable connector indicates that the
transceiver or direct attach cable connector is a standard product from ALAXALA
Networks Corporation or another manufacturer. However, such labels are attached
where they do not interfere with heat dissipation from the transceiver or from the
direct attach cable connector or interfere with the mechanism that prevents the
transceiver or the direct attach cable connector from coming loose from the cage.
Attaching a label to a location that interferes with these functions could cause a
malfunction in the transceiver or a direct attach cable connector, or cause damage
to the Switch.
Make sure that you use a valid combination of direct attach cables and the
Switch.
 SFPP-CU1M/3M/5Ms are supported by the switches below. Use them only with the
indicated switches. Otherwise, the switch might fail.
- AX3650S-24T6XW (target ports 25 to 30)
- AX3650S-20S6XW (target ports 25 to 30)
- AX3650S-48T4XW (target ports 49 to 52)
- AX3830S-44XW (target ports 1 to 44)