Instruction manual

5. Expansion, Replacement and Removal
193
Figure 5-4 Connecting the power supply unit 1
(1) Power supply unit slot
(2) Power supply unit
[Step 2]
Tighten the screws of the power supply unit.
Figure 5-5 Connecting the power supply unit 2
(1) Screws
[Step 3]
Connect the power cable to the power supply unit.
[Step 4]
Turn on the power supply unit.
5.4.2 Redundant power model (AX3650S, AX3830S)
After a power supply unit is removed, insert a blank panel. Otherwise, the following
problems might occur:
 An increase in the temperature inside the switch might cause a failure.
 The components might cause an injury.
 Foreign matter inside the switch might cause a failure.
 Waves emitted by the Switch might affect other devices, or waves emitted by
other devices might affect the Switch and cause a malfunction.