Instruction manual

4. Installation of the Components
163
(2) Removing
[Step 1]
Push the memory card once until you hear a click. The lock is released and the memory
card is ejected a little.
Figure 4-34 Removing the memory card
(1) Memory card
[Step 2]
Remove the memory card.
Figure 4-35 Removing the memory card
CAUTION
The device is accessing the memory card whenever the ACC LED is lit. Do not
remove the memory card or turn off the device. Otherwise, the memory card might
be damaged.
In addition, some commands take long time to access the memory card after being
executed. Confirm that access has ended before removing the memory card or
turning the power supply unit off.
CAUTION
Do not forcibly pull the locked memory card to remove it. Otherwise, the connector
part of the memory card slot might be damaged.
NOTE
After the memory card is removed, insert the dummy memory card.