Instruction manual

4. Installation of the Components
156
Figure 4-27 Attaching the cable connector
(1) Cable connector
(2) DC power connector
(3) Power supply unit
CAUTION
Prior to attaching or detaching the cable connector, turn off the power.
(2) Removing
[Step 1]
Remove the cable connector from the power unit. Push the tabs on the both sides and pull
it out.
CAUTION
Prior to attaching or detaching the cable connector, turn off the power.
[Step 2]
Push the buttons of the cable connector to remove the DC power cable.
Prior to attaching or detaching the power cable, shut off your electrical power
equipment. Otherwise, a fire or an electric shock might result.
[Step 3]
Detach the ground cable from the device.
NOTE
Put the detached cable connector into the power unit.