Instruction manual

4. Installation of the Components
154
NOTE
When the device is mounted in a rack, fasten the power cable with the cable holder
of the rack in order to avoid stress on the cable connection part.
(1) Installing
[Step 1]
Attach the ground cable to the device.
Figure 4-23 Attaching the ground cable
(1) M4 x 8 screw
(2) Ground cable
(3) Ground terminal
Make sure to connect the ground cable to the ground terminal. Not connecting the
grounded outlet to the switch can cause electric shocks, as well as cause failures
due to electrical noise.
[Step 2]
Remove the cable connector from the power unit. Push the tabs on the both sides and pull
it out.
Figure 4-24 Removing the cable connector
(1) Cable connector
(2) Power supply unit