Instruction manual

4. Installation of the Components
152
(1) Installing
[Step 1]
Attach the ground cable to the device.
Figure 4-21 Attaching the ground cable
(1) M4 x 8 screw
(2) Ground cable
(3) Ground terminal
Make sure to connect the ground cable to the ground terminal. Not connecting the
grounded outlet to the switch can cause electric shocks, as well as cause failures
due to electrical noise.
[Step 2]
Connect the accessory power cable to DC power connector 1 on the back face of the
device. Insert the connecter until you hear a click.
Figure 4-22 Attaching the power cable
(1) DC power connector 2 (with protective cap)
(2) DC power cable
(3) DC power connector 1
Keep the protective cap in place, except when attaching the cable. Otherwise, a fire
or an electric shock might be caused.