Instruction manual

4. Installation of the Components
149
NOTE
For required specifications of power cables, see 2.3.2 Electrical power equipment
for 200 V AC.
[Step 2]
Hold the power cable connector with the cable clamp.
Figure 4-16 Clamping the power cable
Figure 4-17 Clamped power cable
(2) Removing
Unfasten the cable clamp to detach the power cable.
CAUTION
Prior to attaching or detaching the power cable, turn off the switch of relevant power
unit.
4.5.3 AC power cable (redundant power models (AX3650S and AX3830S))
Make sure to connect the device to a grounded outlet. Not connecting the grounded
outlet to the switch can cause electric shocks, as well as cause failures due to
electrical noise.
NOTE
When the device is mounted in a rack, fasten the power cable with the cable holder
of the rack in order to avoid stress on the cable connection part.