Instruction manual

4. Installation of the Components
142
Figure 4-9 Attaching the rack mounting brackets (50 mm adjustment)
(1) Rack mounting bracket (L)
(2) Rack mounting bracket (R)
(3) M3 x 6 screws (12)
NOTE
Use the accessory screws to attach the rack mounting brackets to the EPU.
NOTE
There are four types of rack mounting brackets:
 For AC and DC models: 12 screw holes
 For AC power (PoE) and redundant power models (AX3630S and AX3640S),
and EPU: 12 screw holes with label information "24P/EPU"
 For redundant power model (AX3650S): 10 screw holes
 For redundant power model (AX3830S): 20 screw holes
Confirm that the correct brackets have been selected before attaching the brackets
to the device.
NOTE
The left bracket is marked with an "L", and the right with an "R".