Instruction manual

4. Installation of the Components
141
NOTE
Confirm that the position to attach the rubber pad has no dirt. Wipe any dirt off with
a dry cloth before attaching the rubber pad.
[Step 3]
Flip the EPU back over and mount it on the table.
4.4.2 Rack mount
The EPU can be installed on a 19-inch cabinet rack conforming to the EIA standard.
The procedure is as follows:
NOTE
The accessory rack mounting brackets are compatible with M5 screws. Use a rack
compatible with M5 screws.
NOTE
For rack-mounting conditions, see (2) 19-inch cabinet rack.
[Step 1]
Attach the rack mounting brackets to the EPU.
Figure 4-8 Attaching the rack mounting brackets
(1) Rack mounting bracket (L)
(2) Rack mounting bracket (R)
(3) M3 x 6 screws (12)
NOTE
If 100 mm of space for cables cannot be provided in front of the EPU, shift the rack
mounting brackets by 50 mm so that they protrude in the front, as shown in the
figure below.