Instruction manual
1. Components Overview
84
SFP+ uses a laser beam, which is colorless and invisible. Do not directly look into
the optical transmitter/receiver part.
CAUTION
Do not attach other labels to the transceiver.
The transceivers have labels to certify that they are standard products of the
manufacturer or ALAXALA Networks Corporation. These labels are attached so as
not to disturb heat radiation from the transceiver or the mechanism to avoid
dropping from the cage.
Attaching a label on an interfering part with heat radiation or the mechanism to
avoid dropping from the cage might cause a failure in the transceiver or damage to
the device.
NOTE
Make sure to use our standard products with the label shown in the figure.
Otherwise, correct operation is not guaranteed.
(1) SFPP-SR
Figure 1-97 External appearance
(1) Label information: AlaxalA SFPP-SR
(2) Handle color: Ivory
(2) SFPP-LR
Figure 1-98 External appearance
(1) Label information: AlaxalA SFPP-LR
(2) Handle color: Blue