Instruction manual

1. Components Overview
79
Num
ber
Module name
Interface
Supported models
7
SFP-LHB
SFP-LHB (T)
Gigabit Ethernet 1000BASE-LHB
8
SFP-BX1U
SFP-BX1U (T)
Gigabit Ethernet 1000BASE-BX10-U
#3
9
SFP-BX1D
SFP-BX1D (T)
Gigabit Ethernet 1000BASE-BX10-D
#3
10
SFP-BX4U
SFP-BX4U (T)
Gigabit Ethernet 1000BASE-BX40-U
#4
11
SFP-BX4D
SFP-BX4D (T)
Gigabit Ethernet 1000BASE-BX40-D
#4
#1: Connections can be established with SFP slot ports 5 to 24.
#2: Connections can be established with SFP slot ports 1 to 20.
#3: 1000BASE-BX10-U and 1000BASE-BX10-D are paired for use.
#4: 1000BASE-BX40-U and 1000BASE-BX40-D are paired for use.
#5: Only 1000BASE-T operations are supported.
The SFPs (except for SFP and SFP-T (T) transceivers) use laser beams that are
colorless and invisible. Do not directly look into the optical transmitter/receiver part.
CAUTION
Do not attach other labels to the transceiver.
The transceivers have labels to certify that they are standard products of the
manufacturer or ALAXALA Networks Corporation. These labels are attached so as
not to disturb heat radiation from the transceiver or the mechanism to avoid
dropping from the cage.
Attaching a label on an interfering part with heat radiation or the mechanism to
avoid dropping from the cage might cause a failure in the transceiver or damage to
the device.
NOTE
Make sure to use our standard products with the label shown in the figure.
Otherwise, correct operation is not guaranteed.
(1) SFP-T and SFP-T (T)
Figure 1-86 External appearance
(1) Label information: AlaxalA SFP-T or AlaxalA SFP-T (T) transceivers