Instruction manual

1. Components Overview
77
1.6 Memory card
A memory card is inserted in the memory card slot of the main device.
The memory card is used for the following:
 Backing up operating information.
 Saving troubleshooting information in the event of a failure.
 Updating the Switch software.
(1) SD128 and SD128 (T)
Below is an SD memory card with a 128-MB capacity.
Figure 1-84 External appearance
Label information: AlaxalA SD128 or AlaxalA SD128 (T)
(2) SD1G
Below is an SD memory card with a 1-GB capacity.
Figure 1-85 External appearance
Label information: AlaxalA SD1G
NOTE
Make sure to use our standard products with the label shown in the figure.
Otherwise, correct operation is not guaranteed.
NOTE
The memory card can be written to approximately ten thousand times.