Troubleshooting guide

A. Detailed display contents of the show tech-support command
84
A. Detailed display contents of the show tech-support command
A.1 Detailed display contents of the "show tech-support" command
The table below lists descriptions of the content that is displayed when protocol parameters
are used with the
show tech-support command.
For details on the displayed information, see the manual Operation Command Reference.
For details about each command in this table in which the Description column contains
"OAN", see the appropriate OAN manual.
[Note]
The manual Operation Command Reference does not cover part of the information
displayed by the
show tech-support command. This type of information is not
made public because it contains internal information of the Switch (available with a
command in this table in which the Description column contains "Internal Switch
information").
Please note that some information might not appear depending on the software
version.
Table A-1 Detailed display contents
No. Command (displayed) Description No
parameter
specified
1
show clock
Time set in the Switch Y
2
show version
Software version and hardware information of the
Switch
Y
3
show system
Operating status of the device Y
4
show environment
Fan/power supply unit/operating time information Y
5
show environment
temperature-logging
Temperature history information Y
6
show running-config
Configuration during operation Y
7
show startup-config
Startup configuration file Y
8
show sessions
Login session information Y
9
show radius-server
RADIUS server information Y
10
show radius-server statistics
RADIUS server statistics Y
11
show radius-server statistics
summary
RADIUS server statistics summary Y
12
show ntp-client
NTP client information Y
13
show power-control port
Port power-saving operating status information Y
14
show power-control schedule
Power saving scheduling information Y