Specifications

schedule-power-control time-range
68
Select sun, mon, tue, wed, thu, fri, or sat, and specify a time for <HHMM>.
Parameters for specifying everyday
start-time <HHMM>
Specifies the start time.
HH
Specify the hour (00 to 23).
MM
Specify the minute (00 to 59).
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a time for <HHMM>.
end-time <HHMM>
Specifies the end time.
HH
Specify the hour (00 to 23).
MM
Specify the minute (00 to 59).
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a time for <HHMM>.
action {enable | disable}
Specifies the power control behavior for the execution time.
enable
Enables the setting specified by using a configuration command for the
scheduled power saving functionality for the time of execution set by using this
command.
disable
Disables the setting specified by using a configuration command for the
scheduled power saving functionality for the time of execution set by using this
command. Thereafter, the following configuration command settings are
enabled:
- system port-led
- power-control port cool-standby
- shutdown
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
enable, disable
Default behavior
None