Specifications

schedule-power-control system-sleep [AX1250S] [AX1240S]
64
schedule-power-control system-sleep [AX1250S] [AX1240S]
Puts a Switch in the sleep state during the scheduled time range.
Putting the Switch in the sleep state reduces the amount of power consumed.
Syntax
To set information:
schedule-power-control system-sleep
To delete information:
no schedule-power-control system-sleep
Input mode
(config)
Parameters
None
Default behavior
The Switch does not switch to the sleep state.
Impact on communication
All communications stop during the scheduled time range.
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. The Switch does not switch to the sleep state during operation in configuration
command mode.
Related commands
schedule-power-control time-range