Specifications

power-control port cool-standby
58
power-control port cool-standby
Enables power saving operation of the link-down port.
Syntax
To set information:
power-control port cool-standby
To delete information:
no power-control port cool-standby
Input mode
(config)
Parameters
None
Default behavior
Operation is at normal power consumption.
Impact on communication
Yes
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. If this command is set, link-up of the Fast Ethernet port takes about 3 seconds.
[AX1250S] [AX1240S]
2. During scheduled operation of the power saving functionality, the Switch operates
according to the configuration of the
schedule-power-control port
cool-standby command. [AX1250S] [AX1240S]
3. This command sets the link status of all Fast Ethernet ports changes, which affects
communication. [AX1250S] [AX1240S]
4. The power saving functionality is disabled for Fast Ethernet ports with the fixed
speed setting or automatic MDIX functionality disabled. To enable the port power
saving functionality, enable auto-negotiation and the automatic MDIX functionality
(
mdix auto specified) during operation. [AX1250S] [AX1240S]
5. Because the power saving functionality of link-down ports is not supported for
1000BASE-X ports, no operation is performed even if this command is set.
Related commands
None