Specifications

system temperature-warning-level average
55
When the change is applied
The change is applied immediately after setting values are changed.
The threshold of the average temperature is checked at noon or when the Switch is started.
Notes
1. If the following operating environment conditions are not met, the log might be output
at a temperature lower than the specified average temperature:
 Provide sufficient ventilation to efficiently remove the heat from around the
Switches.
 Do not stack Switches.
 Do not install Switches vertically.
 Do not place Switches near heat sources.
2. If the average temperature of the Switch already exceeds the specified value, no
operation message is output until the next threshold check is performed.
Related commands
None