Specifications

system fan mode

Sets the operating mode of the Switch fan.

Syntax

To set information:

system fan mode <mode>

To delete information:

no system fan mode

Input mode

(config)

Parameters

<mode>

Specifies operating mode 1 or 2 for the fan.

1: Low-noise setting

2: Low-temperature setting

1. Default value when this parameter is omitted:

This parameter cannot be omitted.

2. Range of values:

1 and 2

Default behavior

Operating mode 1 (Low-noise setting) is set.

Impact on communication

None

When the change is applied

The change is applied immediately after setting values are changed.

Notes

1. Operation when this command is set differs depending on the Switch model.

Table 6-1 Operation when system fan mode 2 (Low-temperature setting) is set

Model Fan operation type

Behavior when the command is set

AX2230S-24T

AX1250S-24T2C

AX1240S-24T2C

Fanless Because these models do not have fans,

this command is invalid even if it is used.

AX1240S-48T2C Semi-fanless When the low-temperature setting is

selected, the system fan-control

command setting is invalid (fixed fan

speed).