Specifications

36 Error Messages Displayed When Editing the Configuration
666
Message Description
system function isn't set. The mac-authentication port command cannot be set
because the system function command is not set.
Set system function extended-authentication.
36.1.23 Multistep authentication information
Table 36-24 Multistep authentication error messages
Message Description
interface : Relations between multi-step
configuration and legacy mode
configuration(s) are inconsistent.
The authentication multi-step command cannot be set
because legacy mode is enabled.
Delete the following:
 dot1x vlan dynamic enable
 dot1x vlan dynamic radius-vlan
 mac-authentication interface
 mac-authentication vlan
 web-authentication vlan
multi-step: Cannot set the command
because of internal error. (code=x)
The command could not be set because an internal error has
occurred.
x : 1, 2
36.1.24 Uplink redundancy information
Table 36-25 Uplink redundancy error messages
Message Description
Can't set ethernet <IF#> because it is a
channel-group port.
The interface configuration cannot be changed because the
specified interface belongs to a channel group.
<IF#>: Interface port number
Ethernet <IF#> is already an uplink
redundant interface.
The uplink redundancy functionality has already been set for the
specified interface.
<IF#>: Interface port number
Ethernet <IF#> Relations between uplink
redundant and ring protocol are
inconsistent.
The Ring Protocol functionality has already been set for the specified
interface. Either delete the Ring Protocol functionality or specify
another interface.
<IF#>: Interface port number
Port-channel <Channel group#> is
already an uplink redundant interface.
The uplink redundancy functionality has already been set for the
specified interface.
<Channel group#>: Port channel number
Port-channel <Channel group#>
Relations between uplink redundant and
ring protocol are inconsistent.
The Ring Protocol functionality has already been set for the specified
interface. Either delete the Ring Protocol functionality or specify
another interface.
<Channel group#>: Port channel number
Secondary interface is same as primary
interface.
The primary interface and the secondary interface are configured on
the same port.