Specifications

36 Error Messages Displayed When Editing the Configuration
665
Message Description
interface : Relations between individual
force-authorized and common
force-authorized are inconsistent.
The following commands cannot be set for the specified port
because force authentication common across the types of
authentication functionality is set:
 mac-authentication force-authorized vlan
 mac-authentication static-vlan force-authorized
Delete the following:
 authentication force-authorized enable
 authentication force-authorized vlan
interface : Relations between user-group
or legacy mode configuration(s) and
authentication list configuration(s) are
inconsistent.
The mac-authentication authentication command cannot
be set because the authentication method for each user ID or legacy
mode has been set.
Delete the following:
 dot1x vlan dynamic enable
 dot1x vlan dynamic radius-vlan
 web-authentication user-group
 web-authentication vlan
 mac-authentication interface
 mac-authentication vlan
mac-auth : Cannot set the command
because the specified vlan <VLAN ID> is
not found.
The specified VLAN cannot be set because it is not a MAC VLAN.
<VLAN ID>: VLAN ID
mac-auth : Cannot set the command
because of internal error. (code=x)
The command cannot be set because an internal error occurred.
mac-auth : Maximum number of entries
are already defined. <LIST-NAME>
The maximum number of entries for the authentication method list
has been exceeded.
mac-auth : Relations between multi-step
configuration and mac-authentication
interface configuration are inconsistent.
The mac-authentication interface command cannot be set
because multistep authentication is set.
Delete the settings of the authentication multi-step
command.
mac-auth : Relations between multi-step
configuration and mac-authentication
vlan configuration are inconsistent.
The mac-authentication vlan command cannot be set
because multistep authentication is set.
Delete the settings of the authentication multi-step
command.
mac-auth : Relations between
user-group or authentication list
configuration(s) and legacy mode
configuration(s) are inconsistent.
The following commands cannot be set because the authentication
method for each user ID or the port-based authentication method
has been set:
 mac-authentication interface
 mac-authentication vlan
Delete the following:
 dot1x authentication
 web-authentication authentication
 web-authentication user-group
 mac-authentication authentication
radius-server: Cannot add new
radius-server host because the
maximum number is already set.
No more entries can be registered because maximum number of
entries are registered.
radius-server: Port Number is duplicate
between auth port and acct port.
The port numbers for auth-port and acct-port are the same.