Specifications

36 Error Messages Displayed When Editing the Configuration
664
Message Description
ip [<VLAN ID>]: Can't delete IP
configuration with dhcp configuration.
The IP cannot be deleted or changed because it is being used by the
DHCP server configuration.
<VLAN ID> : VLAN ID
It exceeded maximum number of
IP-address pool.
The maximum number of IP address pools has been exceeded.
Revise the network configuration and excluded address settings.
Maximum number of entries are already
defined.
<DHCP-EXCLUDED-ADDRESS>
The maximum number of specifiable excluded addresses has been
exceeded.
Maximum number of entries are already
defined. <DHCP-IF>
The maximum number of specifiable interfaces has been exceeded.
Maximum number of entries are already
defined. <DHCP-POOL>
The maximum number of specifiable pools has been exceeded.
network conflicts. Network settings have been duplicated.
vlan [<VLAN ID>]: Can't delete vlan
configuration referred by other
configuration.
The VLAN cannot be deleted because it is being used by the DHCP
server configuration.
<VLAN ID> : VLAN ID
36.1.22 MAC-based authentication information
Table 36-23 MAC-based authentication error messages
Message Description
interface : Invalid mac-authentication port
configuration.
Deletion is not possible because authentication ip
access-group or authentication arp-relay is set for the
applicable port.
interface : Relations between the
mac-authentication configuration and
the vlan mode configuration are
inconsistent.
MAC-based authentication cannot be set because the specified port
has been set as a protocol port.
interface : Relations between the
mac-authentication configuration and the
mirror configuration are inconsistent.
MAC-based authentication cannot be set because the specified port
has been set as a mirror port.
interface : Relations between the
mac-authentication configuration and the
channel-group configuration within same
port.
Participation in the port channel is not possible because the
specified port is being used by the MAC-based authentication
setting.
interface : Cannot set the command
because the specified vlan <VLAN ID> is
not found.
The specified VLAN cannot be set because it is not a MAC VLAN.
<VLAN ID>: VLAN ID