Specifications

ntp interval
43
ntp interval
Sets the interval for regularly obtaining time information from an NTP server.
Syntax
To set or change information:
ntp interval <Interval>
To delete information:
no ntp interval
Input mode
(config)
Parameters
<Interval>
Sets the interval for obtaining time information from the NTP server. The interval is
set in seconds in decimal.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
120 to 604800 (seconds)
Default behavior
3600 seconds is set as the interval for obtaining time information from the NTP server.
Impact on communication
None
When the change is applied
When the ntp client server command has been set, the change takes effect immediately
after the setting value is changed.
Notes
The setting takes effect if the ntp client server command has been set.
Related commands
ntp client server