Specifications

36 Error Messages Displayed When Editing the Configuration
663
Message Description
system function isn't set. The following commands cannot be set because the system
function command is not set:
 web-authentication ip address
 web-authentication port
Use the system function command to set
extended-authentication.
web-auth : Cannot set the command
because the specified vlan <VLAN ID> is
not found.
The specified VLAN cannot be set because it is not a MAC VLAN.
<VLAN ID> : VLAN ID
web-auth : Cannot set the command
because of internal error. (code=x)
The command could not be set because an internal error has
occurred.
web-auth : Maximum number of entries
are already defined. <LIST-NAME>
The maximum number of entries for the authentication method list
has been exceeded.
web-auth : Relations between multi-step
configuration and web-authentication
vlan configuration are inconsistent.
The web-authentication vlan command cannot be set
because multistep authentication is set.
Delete the settings of the authentication multi-step
command.
web-auth : Relations between
authentication list or legacy mode
configuration(s) and user-group
configuration are inconsistent.
The web-authentication user-group command cannot be
set because the port-based authentication method or legacy mode
is set.
Delete the following:
 dot1x authentication
 dot1x vlan dynamic enable
 dot1x vlan dynamic radius-vlan
 web-authentication authentication
 web-authentication vlan
 mac-authentication authentication
 mac-authentication interface
 mac-authentication vlan
web-auth : Relations between user-group
or authentication list configuration(s) and
legacy mode configuration(s) are
inconsistent.
The web-authentication vlan command cannot be set
because the authentication method for each user ID or the
port-based authentication method is set.
Delete the following:
 dot1x authentication
 web-authentication authentication
 web-authentication user-group
 mac-authentication authentication
Table 36-22 Web authentication error messages (internal DHCP server setting)
Message Description
Can not delete it because data is not
corresponding.
The specified setting cannot be deleted because it does not exist.
Interface not found. No VLANs or IP addresses are set. Revise the VLAN and IP
settings.
Invalid network. The network configuration is invalid.