Specifications

36 Error Messages Displayed When Editing the Configuration
662
Message Description
interface : Invalid web-authentication
html-fileset configuration.
The web-authentication html-fileset command cannot be
set because the web-authentication port command is not set
on the applicable port.
interface : Invalid web-authentication port
configuration.
The web-authentication port command cannot be deleted
because the following commands are set on the applicable port:
 authentication ip access-group
 authentication arp-relay
 web-authentication html-fileset
interface : Relations between the
web-authentication configuration and the
channel-group configuration within same
port.
Participation in the port channel is not possible because the
specified port is being used by the Web authentication setting.
interface : Relations between the
web-authentication configuration and the
vlan mode configuration are inconsistent.
Web authentication cannot be set because the specified port has
been set as a protocol port.
interface : Relations between the
web-authentication configuration and the
mirror configuration are inconsistent.
Web authentication cannot be set because the specified port has
been set as a mirror port.
interface : Relations between user-group
or legacy mode configuration(s) and
authentication list configuration(s) are
inconsistent.
The web-authentication authentication command cannot
be set because the authentication method for each user ID or legacy
mode is set.
Delete the following:
 dot1x vlan dynamic enable
 dot1x vlan dynamic radius-vlan
 web-authentication user-group
 web-authentication vlan
 mac-authentication interface
 mac-authentication vlan
interface : Cannot set the command
because the specified vlan <VLAN ID> is
not found.
The specified VLAN cannot be set because it is not a MAC VLAN.
<VLAN ID>: VLAN ID
interface : Relations between individual
force-authorized and common
force-authorized are inconsistent.
The following commands cannot be set for the specified port
because force authentication common across the types of
authentication functionality is set:
 web-authentication force-authorized vlan
 web-authentication static-vlan force-authorized
Delete the following:
 authentication force-authorized enable
 authentication force-authorized vlan
radius-server: Cannot add new
radius-server host because the
maximum number is already set.
No more entries can be registered because maximum number of
entries are registered.
radius-server: Port Number is duplicate
between auth port and acct port.
The port numbers for auth-port and acct-port are the same.