Specifications

36 Error Messages Displayed When Editing the Configuration
661
Message Description
dot1x(vlan dynamic): Cannot set "dot1x
vlan dynamic radius-vlan" because
authentication list or user-group is set.
The dot1x vlan dynamic radius-vlan command cannot be
set because the authentication method for each user ID or the
port-based authentication method is set.
Delete the following:
 dot1x authentication
 mac-authentication authentication
 web-authentication authentication
 web-authentication user-group
dot1x(vlan dynamic): Cannot set "dot1x
vlan dynamic radius-vlan" because the
authentication multi-step is set.
The dot1x vlan dynamic radius-vlan command cannot be
set because multistep authentication is set.
Delete the settings of the authentication multi-step
command.
dot1x: Cannot set "dot1x
system-auth-control" because
l2protocol-tunnel eap configuration is
valid now.
IEEE 802.1X cannot be set because the EAPOL forwarding
functionality is enabled.
l2protocol-tunnel: Cannot set
"l2protocol-tunnel eap" because 802.1X
configuration is valid now.
The EAPOL forwarding functionality cannot be set because IEEE
802.1X is enabled.
radius-server: Cannot add new
radius-server host because the
maximum number is already set.
No more entries can be registered because maximum number of
entries are registered.
radius-server: Port Number is duplicate
between auth port and acct port.
The port numbers for auth-port and acct-port are the same.
system function isn't set. The following commands cannot be set because the system
function command is not set:
 dot1x port-control auto
 authentication arp-relay
 authentication ip access-group
xxxxx: Cannot set the command because
of internal error. (code=y)
The command could not be set because an internal error has
occurred.
xxxxx : dot1x / radius-server / l2protocol-tunnel /
multi-step , y : 1, 2, 3, 4
36.1.21 Web authentication information (including DHCP server information)
Table 36-21 Web authentication error messages
Message Description
Conflicting port number. The same Web authentication port number is used more than once.
Eliminate duplication of Web authentication port numbers.
Duplicate network address. An IP address of the same network address is defined for another
VLAN.
Set the Web authentication IP address so that it does not duplicate a
VLAN network address.