Specifications

36 Error Messages Displayed When Editing the Configuration
659
Message Description
dot1x(vlan dynamic): Cannot set "dot1x
vlan dynamic supplicant-detection
disable" because ignore-eapol-start is set
now.
The terminal detection mode cannot be disabled because the
functionality for suppressing the re-authentication of requests from a
terminal for VLAN-based authentication (dynamic) is set.
dot1x(vlan dynamic): Cannot set "no
dot1x vlan dynamic reauthentication"
because ignore-eapol-start is set now.
The re-authentication request functionality cannot be disabled
because the functionality for suppressing the re-authentication of
requests from a terminal for VLAN-based authentication (dynamic)
is set.
dot1x(xxxx): Cannot delete "dot1x
port-control" because authentication ip
access-group/arp-relay is set.
dot1x port-control cannot be deleted because
authentication arp-relay and authentication ip
access-group are set for the xxxxx interface.
xxxxx:
ethernet <IF#>: Ethernet interface port number
port-channel <Channel group#>: Port channel number
dot1x(xxxx): Cannot delete "dot1x
port-control" because dot1x
force-authorized is set.
dot1x port-control cannot be deleted because the dot1x
force-authorized command is set for the xxxxx interface.
xxxxx:
ethernet <IF#>: Ethernet interface port number
port-channel <Channel group#>: Port channel number
dot1x(xxxx): Cannot set "dot1x
force-authorized"
because authentication force-authorized
is set.
The dot1x force-authorized command cannot be set because
the authentication force-authorized command is set for
the xxxxx interface.
ethernet <IF#>: Ethernet interface port number
port-channel <Channel group#>: Port channel number
dot1x(xxxx): Cannot set "dot1x
force-authorized" because 802.1X auth
mode is unmatch.
The dot1x force-authorized command cannot be set because
authentication mode of the xxxxx interface is different.
xxxxx:
ethernet <IF#>: Ethernet interface port number
port-channel <Channel group#>: Port channel number
dot1x(xxxxx): Cannot set "dot1x
ignore-eapol-start" because
reauthentication mode is invalid.
The functionality for suppressing the re-authentication of requests
from a terminal cannot be set because the re-authentication request
functionality of the xxxxx interface is not enabled.
xxxxx:
ethernet <IF#>: Ethernet interface port number
port-channel <Channel group#>: Port channel number
dot1x(xxxxx): Cannot set "dot1x
ignore-eapol-start" because
supplicant-detection is disable-method.
The functionality for suppressing the re-authentication of requests
from a terminal cannot be set because the terminal detection mode
of the xxxxx interface is disabled.
xxxxx:
ethernet <IF#>: Ethernet interface port number
port-channel <Channel group#>: Port channel number
dot1x: Cannot set "aaa authentication
dot1x" because the maximum number is
already set.
No more entries can be registered because the maximum number of
entries are already registered in the authentication method list.
dot1x(xxxxx): Cannot set "dot1x
multiple-authentication" because
force-mode is set now.
Terminal authentication mode cannot be set because the xxxxx
interface is in force-unauthorized mode or force-authorized mode.
xxxxx:
ethernet <IF#>: Ethernet interface port number