Specifications

36 Error Messages Displayed When Editing the Configuration
653
36.1.13 IGMP snooping information
Table 36-13 IGMP snooping error messages
Message Description
Maximum number of VLAN are already
defined, <VLAN ID> igmp snooping can
not enable.
A maximum of 32 VLANs can be set for IGMP snooping and MLD
snooping. No more than 32 VLANs can be set.
<VLAN ID> : VLAN ID
system function isn't set. The setting is not possible because the system function
command has not been set.
Use the system function command to set IGMP snooping.
36.1.14 MLD snooping information
Table 36-14 MLD snooping error messages
Message Description
Duplicate mld query message source
address.
The setting is not possible because the source IP address of the
same MLD query message has already been defined.
Maximum number of VLAN are already
defined, <VLAN ID> mld snooping can
not enable.
A maximum of 32 VLANs can be set for IGMP snooping and MLD
snooping. No more than 32 VLANs can be set.
<VLAN ID> : VLAN ID
system function isn't set. The setting is not possible because the system function
command has not been set.
Use the system function to set MLD snooping.
36.1.15 IPv4, ARP, and ICMP information
Table 36-15 IPv4, ARP, and ICMP error messages
Message Description
ip : Inconsistency has occurred in a
setting of IP address and route.
There is an inconsistency between an address set by using IP
information and a next-hop network address set by using route
information.
Set the next hop correctly.
ip : IP address is duplicate between
interface and nexthop.
An address set by using IP information and a next-hop address set
by using route information are the same.
Set the addresses that do not duplicate one another.
ip : maximum number of route are
already defined.
No more route information can be set.
Review the network configuration.
ip[<VLAN ID>] : Can't delete IP
configuration with route configuration.
Route information exists.
Delete the route information, and then delete the IP information.
<VLAN ID> : VLAN ID