Specifications

36 Error Messages Displayed When Editing the Configuration
652
Message Description
Can't delete it vlan configuration referred
by other configuration.
Deletion is not possible because the ip source binding setting
uses the VLAN.
First, delete the ip source binding setting that specifies the
VLAN you want to delete.
Can't set it because snooping is disable. The specified VLAN cannot be set because DHCP snooping for the
VLAN is not enabled.
Specify a VLAN for which DHCP snooping is enabled.
Can't set it because vlan doesn't exist. The VLAN specified by using no ip dhcp snooping vlan cannot
be deleted because it does not exist.
The VLAN specified by using no ip arp inspection vlan
cannot be deleted because it does not exist.
Duplicate entry. The setting is not possible because the setting duplicates another
setting.
Delete the duplicated setting, and then set this again.
Maximum number of entries are already
defined.
The number of VLAN settings specified by using ip dhcp
snooping vlan exceeds the maximum number of specifiable
items.
The setting is not possible because the total number of configuration
settings and dynamic learning items for ip source binding
exceeds the maximum number of binding database entries. Delete
unnecessary configuration settings or dynamic learning items, and
then set this again.
The number of VLANs set by using ip arp inspection vlan
exceeds the maximum number of specifiable VLANs.
Relations between ip dhcp snooping
configuration and channel-group
configuration are inconsistent.
The applicable port cannot be set because it belongs to a channel
group.
Set the port as a port channel interface.
Relations between ip source binding
configuration and channel-group
configuration are inconsistent.
The specified port cannot be set because it either belongs to a
channel group or the specified port channel does not exist.
Relations between ip source binding
configuration and switchport
configuration are inconsistent.
The specified interface cannot be set because it does not belong to
the VLAN.
Relations between ip verify source
configuration and channel-group
configuration are inconsistent.
The applicable port cannot be set because it belongs to a channel
group.
Set the port as a port channel interface.
system function isn't set. The setting is not possible because the system function
command has not been set.
Use the system function command to set DHCP snooping.