Specifications

36 Error Messages Displayed When Editing the Configuration
651
Message Description
<Ring ID>: Ring ID
<VLAN ID>: VLAN ID
axrp-<Ring ID>: vlan-mapping
<Mapping ID> is already configured in
vlan-group of other ring.
The specified VLAN mapping has already been set for a VLAN group
in another ring.
Either delete the VLAN mapping from the other VLAN group or use
other VLAN groups.
<Ring ID>: Ring ID
<Mapping ID>: VLAN mapping ID
axrp-<Ring ID>-<Group ID>:
vlan-mapping <Mapping ID> is already
configured in another vlan-group.
The specified VLAN mapping has already been set for a VLAN group
in the same ring.
Either delete the VLAN mapping from another VLAN group or use
another VLAN mapping.
<Ring ID>: Ring ID
<Group ID>: VLAN group ID
<Mapping ID>: VLAN mapping ID
axrp-vlan-mapping-<Mapping ID>: vlan
<VLAN ID> is already configured in
control-vlan.
The specified VLAN has already been set in the control VLAN.
Either delete the applicable VLAN from the control VLAN or use
another VLAN.
<Mapping ID>: VLAN mapping ID
<VLAN ID>: VLAN ID
axrp-vlan-mapping-<Mapping ID>: vlan
<VLAN ID> is already configured in
multi-fault-detection-vlan.
The specified VLAN has already been set in the multi-fault monitoring
VLAN.
Either delete the applicable VLAN from the multi-fault monitoring
VLAN or use another VLAN.
<Mapping ID>: VLAN mapping ID
<VLAN ID>: VLAN ID
axrp-vlan-mapping-<Mapping ID>: vlan
<VLAN ID> is already configured in
other vlan-mapping.
The specified VLAN has already been set for another mapping.
Either delete the applicable VLAN from the other VLAN mapping or
use another VLAN.
<Mapping ID>: VLAN mapping ID
<VLAN ID>: VLAN ID
Cannot configure Ring Protocol when
spanning-tree is configured.
The Ring Protocol functionality cannot be set because a Spanning
Tree Protocol is set.
36.1.12 DHCP snooping information
Table 36-12 DHCP snooping error messages
Message Description
Can't delete it because data is not
corresponding.
Deletion is not possible because DHCP snooping for the specified
VLAN is not enabled or the specified configuration does not exist.