Specifications

36 Error Messages Displayed When Editing the Configuration
650
Message Description
axrp-<Ring ID>: maximum number of
ring-port are already defined.
Set two ring ports for each ring ID.
To set another port as a ring port, first delete a ring port that has
already been set.
<Ring ID>: Ring ID
axrp-<Ring ID>: Relations between
uplink redundant and ring protocol are
inconsistent.
The uplink redundancy functionality has already been set for the
specified interface.
Delete the uplink redundancy functionality or specify another
interface.
<Ring ID>: Ring ID
axrp-<Ring ID>: this interface is already
defined as a ring port of other ring
configured the same vlan-mapping.
The specified interface has already been set as a ring port of another
ring to which the same VLAN mapping as the ring set by using this
command is applied.
Set the applicable interface as a shared link or specify another
interface.
<Ring ID>: Ring ID
axrp-<Ring ID>: vlan <VLAN ID> is
already configured in control-vlan.
The specified VLAN has already been set in the control VLAN.
Either delete the applicable VLAN from the control VLAN or use
another VLAN.
<Ring ID>: Ring ID
<VLAN ID>: VLAN ID
axrp-<Ring ID>: vlan <VLAN ID> is
already configured in control-vlan of
other ring.
The specified VLAN has already been set in the control VLAN of
another ring.
Either delete the applicable VLAN from the other ring's control VLAN
or use another VLAN.
<Ring ID>: Ring ID
<VLAN ID>: VLAN ID
axrp-<Ring ID>: vlan <VLAN ID> is
already configured in
multi-fault-detection-vlan.
The specified VLAN has already been set in the multi-fault monitoring
VLAN.
Either delete the applicable VLAN from the multi-fault monitoring
VLAN or use another VLAN.
<Ring ID>: Ring ID
<VLAN ID>: VLAN ID
axrp-<Ring ID>: vlan <VLAN ID> is
already configured in
multi-fault-detection-vlan of other ring.
The specified VLAN has already been set in the multi-fault monitoring
VLAN of another ring.
Either delete the applicable VLAN from the other ring's multi-fault
monitoring VLAN or use another VLAN.
<Ring ID>: Ring ID
<VLAN ID>: VLAN ID
axrp-<Ring ID>: vlan <VLAN ID> is
already configured in vlan-mapping.
The specified VLAN has already been set for VLAN mapping.
Either delete the applicable VLAN from the VLAN mapping or use
another VLAN.