Specifications

36 Error Messages Displayed When Editing the Configuration
647
Message Description
Relations between vlan in dot1q
configuration and native configuration
are inconsistent.
switchport mac dot1q vlan and switchport mac native
vlan cannot be set because they are set for the same VLAN.
Relations between vlan in ip source
binding configuration and switchport
configuration are inconsistent.
The configurations cannot be changed because ip source
binding is using it.
Delete the ip source binding setting, and then set it again.
Relations between vlan in qos-flow-group
configuration and switchport
configuration are inconsistent.
The configuration of the specified VLAN cannot be changed
because it is used by ip qos-flow-group or mac
qos-flow-group.
Delete the configuration of ip qos-flow-group or mac
qos-flow-group for which the applicable VLAN is set, and then
reconfigure.
vlan : Can't change mode from
{nothing|protocol-based|mac-based } to
{nothing|protocol-based|mac-based }.
The VLAN types of the specified VLAN modes do not match. (VLAN
range specification)
vlan : Can't delete vlan configuration
because of default vlan.
The VLAN cannot be deleted because it is the default VLAN.
vlan : Can't setting port[<IF#>] because
of channel-group port.
The specified port number cannot be set from the port because the
port number belongs to the channel group.
<IF#>: Interface port number
vlan : Data(mac-address) is invalid. The specified mac-address cannot be registered because it is not
in the specifiable range.
vlan : maximum number which can be
used is exceeded.
No more entries can be generated because the number of VLANs
exceeds the maximum number of entries.
vlan : Not found protocol name. The VLAN cannot be set because vlan-protocol has not been
set.
vlan : Some port's setting have been
failed.
Setting of a port from a channel has failed.
vlan : Some setting can't have been done
because of vlan unmatch.
Some VLANs cannot be set because at least one of the VLANs does
not exist.
vlan[<VLAN ID>] : Can't change mode
from
{nothing|protocol-based|mac-based} to
{nothing|protocol-based|mac-based}.
The VLAN types of the specified VLAN modes do not match. (Only
VLAN is specified.)
<VLAN ID>: VLAN ID
vlan[<VLAN ID>] : Can't delete it because
data is not corresponding.
The specified VLAN cannot be deleted because it does not exist.
The specified mac-address cannot be deleted because it is not
registered.
The specified mac-address-table cannot be deleted because it
does not exist.
<VLAN ID>: VLAN ID
vlan[<VLAN ID>] : Can't delete
port-channel configuration referred by
other configuration.
The VLAN cannot be deleted because it is being used by another
configuration.
<VLAN ID>: VLAN ID