Specifications

36 Error Messages Displayed When Editing the Configuration
646
36.1.8 MAC address table information
Table 36-8 MAC address table error messages
Message Description
Can't set mac-address-table because of
port-channel nothing.
mac-address-table cannot be set because no port channels
exist.
Relations between vlan in
mac-address-table static configuration
and switchport configuration are
inconsistent.
The mac-address-table static VLAN specification and the
switchport configuration do not match. A VLAN set by using
mac-address-table static must be set by switchport
access/switchport trunk allowed vlan/switchport mac
vlan/switchport protocol vlan of the interface that has been
set.
36.1.9 VLAN information
Table 36-9 VLAN error messages
Message Description
ChGr <Channel group#>: Inconsistency
is found between the dot1x port-control
and the switchport mode configuration.
The port channel cannot be deleted because it is being used for
IEEE 802.1X authentication or as a switch port.
<Channel group#>: Channel group number
Inconsistency is found between the dot1x
vlan enable or dot1x vlan dynamic
radius-vlan <VLAN ID> and the vlan
configuration.
The specified VLAN cannot be deleted because it is being used as
the VLAN for IEEE 802.1X VLAN-based authentication (dynamic).
<VLAN ID>: VLAN ID
interface : Relations between the
mac-authentication configuration and
the vlan mode configuration are
inconsistent.
The configuration of the specified port cannot be changed because
the port is being used for MAC-based authentication.
Delete the mac-authentication port configuration, and then
reconfigure.
interface : Relations between the
web-authentication configuration and the
vlan mode configuration are inconsistent.
The configuration of the specified port cannot be changed because
the port is used for Web authentication.
Delete the web-authentication port configuration, and then
reconfigure.
Mirror port and switchport are
inconsistent.
Both mirror port and switchport settings cannot be specified
simultaneously.
port <IF#>: Inconsistency is found
between the dot1x port-control and the
switchport mode configuration.
The configuration of the specified port cannot be changed because
the port is being used for IEEE 802.1X authentication.
<IF#>: Interface port number
Relations between vlan in access-group
configuration and switchport
configuration are inconsistent.
The configuration of the specified VLAN cannot be changed
because the VLAN is being used by ip access-group or mac
access-group.
Delete the configuration of ip access-group or mac
access-group for the applicable VLAN, and then reconfigure.
Relations between vlan in dot1q
configuration and mac vlan configuration
are inconsistent.
switchport mac dot1q vlan and switchport mac vlan
cannot be set because they use the same VLAN.