Specifications

36 Error Messages Displayed When Editing the Configuration
645
Message Description
interface : Relations between the
mac-authentication configuration and the
channel-group configuration within same
port.
Participation in the port channel is not possible because the
specified port is being used by the MAC-based authentication
setting.
interface : Relations between the
web-authentication configuration and the
channel-group configuration within same
port.
Participation in the port channel is not possible because the
specified port is being used by the Web authentication setting.
interface : this command is different from
this one in channel-group port.
Participation in the port channel is not possible because the
configuration is different.
invalid data[channel-group]. The port channel number specification is invalid.
invalid data[ethernet-if]. The interface port number specification is invalid.
Maximum number of channel-group port
are already defined.
No more ports can be set.
Check the number of ports for each channel group.
Mirror port and port-channel are
inconsistent.
Participation in the port channel is not possible because the port is
being used as a mirror port.
Relations between ip dhcp snooping
configuration and channel-group
configuration are inconsistent.
Participation in the port channel is not possible because the port is
being used by the ip dhcp snooping setting.
Delete the ip dhcp snooping setting, and then set it again.
Relations between ip source binding
configuration and channel-group
configuration are inconsistent.
Participation in the port channel is not possible because the port is
being used by the ip source binding setting.
Delete the ip source binding setting, and then set it again.
The specified port cannot be deleted because it is being used by the
ip source binding setting.
Delete the ip source binding setting, and then set it again.
Relations between ip verify source
configuration and channel-group
configuration are inconsistent.
The specified port cannot participate in the port channel because the
port is being used by the ip verify source setting.
Delete the ip verify source setting, and then set it again.
Relations between vlan in
mac-address-table static configuration
and channel-group configuration are
inconsistent.
Participation in the port channel is not possible because the
interface is being used by mac-address-table static.
this command is different from this one in
channel-group port.
Different settings were found on ports specified for the same
channel group.
The configuration of the ports specified for the same channel group
must either match or be deleted.
vlan : Data(port-channel) is invalid. The port channel number specification is invalid.
vlan : This command is different from vlan
configuration in channel-group port.
The VLAN cannot join the port channel because the VLAN
configuration is different.