Specifications

36 Error Messages Displayed When Editing the Configuration
644
Message Description
port:Relations between media type and
<command> configuration are
inconsistent.
The <command> information cannot be changed because
media-type auto is set.
<command>: duplex, mdix auto, and speed
this command is different from this one in
channel-group port.
The configured command and the port channel configuration do not
match.
Match the configuration of the port channel to the configuration of
the command.
36.1.7 Link aggregation information
Table 36-7 Link aggregation error messages
Message Description
Can't delete port-channel configuration
referred by other configuration.
The VLAN cannot be deleted because it is being used by another
configuration.
Cannot attach the interface specified as a
ring-port to the channel-group.
The interface set as a ring port cannot participate in the port
channel.
To allow the specified interface to participate in the port channel, first
delete the ring-related configuration.
dot1x(link-aggregation): The specified
ethernet <IF#> cannot add to the
specified port-channel(<Channel
group#>) because 802.1X configuration
is different.
ethernet <IF#> cannot be registered for the specified
port-channel (<Channel group#>) because the IEEE 802.1X
settings, which must all be the same for link aggregation, are
different.
<IF#>: Interface port number
<Channel group#>: Channel group number
interface : Cannot attach the interface
that specified cfm enable to the
channel-group.
The interface for which CFM is set to enable cannot participate in
the port channel.
To allow the specified interface to participate in the port channel, first
delete enable for CFM.
interface : Cannot attach the interface
that specified mep to the channel-group.
The interface for which MEP is set cannot participate in the port
channel.
To allow the specified interface to participate in the port channel, first
delete MEP.
interface : Cannot attach the interface
that specified mip to the channel-group.
The interface for which MIP is set cannot participate in the port
channel.
To allow the specified interface to participate in the port channel, first
delete MIP.
interface : Invalid authentication arp-relay
configuration.
Participation in the port channel is not possible because the
authentication arp-relay settings are different.
interface : Invalid authentication ip
access-group configuration.
Participation in the port channel is not possible because the
authentication ip access-group settings are different.
interface : Relations between
authentication configuration and
channel-group configuration within same
port.
Participation in the port channel is not possible because the
specified port is being used by an authentication common
command.