Specifications

ntp client broadcast
41
ntp client broadcast
Sets acceptance of time information broadcast from an NTP server.
Syntax
To set information:
ntp client broadcast
To delete information:
no ntp client broadcast
Input mode
(config)
Parameters
None
Default behavior
The time information broadcast from the NTP server is not accepted.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
If ntp client server and ntp client broadcast or ntp client multicast are both set,
the
ntp client server setting is effective.
Related commands
ntp client server
ntp client multicast