Specifications

36 Error Messages Displayed When Editing the Configuration
642
Message Description
Wrong type. The type is incorrect.
Wrong value. The value is incorrect.
Invalid parameter 'xxx'. The xxx parameter is invalid.
Some parameters are insufficient. Some parameters are missing.
Cannot set TOS/Precedence and DSCP
at the same time.
Both TOS/Precedence and DSCP cannot be set at the same time.
Set one or the other.
36.1.2 Login Security and RADIUS
Table 36-2 Error messages related to login security and RADIUS
Message Description
Can't delete it because data is not
corresponding.
The specified configuration cannot be deleted because it does not
exist.
radius-server: Cannot add new group
because the maximum number is already
set.
No more entries can be registered because maximum number of
entries are registered.
radius-server: Cannot add new
radius-server host because the
maximum number is already set.
No more entries can be registered because maximum number of
entries are registered.
radius-server: Port Number is duplicate
between auth port and acct port.
The port numbers for auth-port and acct-port are the same.
36.1.3 Time settings and NTP information
Table 36-3 Error messages related to time settings and NTP
Message Description
Entry count over No more NTP server addresses can be set. Check the NTP server
addresses that have already been set.
36.1.4 Switch management information
Table 36-4 Error messages related to Switch management
Message Description
dhcp-snooping is in use. This setting cannot be changed because the DHCP snooping
functionality is enabled. Delete the setting of ip dhcp snooping.