Specifications

36 Error Messages Displayed When Editing the Configuration
641
Message Description
Log out by the system. You have been logged out by the system.
Login incorrect. You are not permitted to log in to the specified host.
Missing parameter. A parameter is missing.
Missing parameter data. Parameter data is missing.
No Access. Access is not provided.
No help available. The Help file is invalid.
'no' is not applicable. "no" cannot be entered.
No such name. No such name was found.
Not found: The item could not be found.
Not writable. Writing is not possible.
Out of range. Valid range is: <range> The value is not in the specifiable range. The valid range is <range>.
Please set parameter more than one. No parameters have been set.
Read only. This information is read only.
Resource unavailable. The resource is invalid.
String must be more than 0 characters. A string must have at least one character.
String too long. The character string is too long.
The command execution failed, because
"xxx" is executing.
The command is being executed by another user. Wait a while and
then try again, or else check whether another user is running the
command.
xxx: Information regarding another user (for example, console,
vty0, vty1 is displayed.)
The number of the <HEX enum>
exceeds a maximum number.
The number of <HEX enum> parameters exceeds the maximum.
This command is not supported with this
model.
The command is not supported by this model.
This command uses the "no" prefix. The command uses the "no" prefix.
Too big. The value is too large.
Too many parameters. There are too many parameters.
Unknown user. The specified user name is not registered.
Wrong encoding. The encoding method is incorrect.
Wrong length. The length is incorrect.