Specifications

lldp interval-time
632
lldp interval-time
Sets the transmission interval between LLDP frames sent from a Switch.
Syntax
To set or change information:
lldp interval-time <Seconds>
To delete information:
no lldp interval-time
Input mode
(config)
Parameters
<Seconds>
Sets the transmission interval between LLDP frames sent from a Switch.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
5 to 32768 (seconds)
Default behavior
30 seconds is used as the sending interval between LLDP frames sent from the Switch.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
lldp run