Specifications

logging facility
623
logging facility
Sets a facility to which log information is output via the syslog interface.
Syntax
To set or change information:
logging facility <Facility>
To delete information:
no logging facility
Input mode
(config)
Parameters
<Facility>
Specifies the facility for syslog.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify
local0, local1, local2, local3, local4, local5, local6, or
local7.
Default behavior
local0 is used as the facility.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. The facility set by using this command is applied to all output destinations specified
by the
logging host command.
Related commands
logging host