Specifications

logging event-kind
622
logging event-kind
Sets the event type of the log information to be sent to the syslog server. Multiple event
types can be set.
Syntax
To set or change information:
logging event-kind <Event kind>
To delete information:
no logging event-kind <Event kind>
Input mode
(config)
Parameters
<Event kind>
Specifies the event type of the log information to be output.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify
key, rsp, err, or evt.
Default behavior
evt or err is set as the event type.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. The event type set by using this command is applied to all output destinations
specified by the
logging host command.
2. If the event type is set by using this command, the default event types (
evt and err)
become invalid and only the event types that have been set take effect.
Related commands
logging host