Specifications

snmp trap link-status
619
snmp trap link-status
When no snmp trap link-status is set, linkDown and linkUp traps are not transmitted
whenever a link-up failure or a link-down failure occurs on a line.
Syntax
To set information:
no snmp trap link-status
To delete information:
snmp trap link-status
Input mode
(config-if)
Parameters
None
Default behavior
Sending linkDown and linkUp traps is not suppressed.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
None