Specifications

snmp-server traps
617
1. Default value when this parameter is omitted:
standard
2. Range of values:
private or standard
agent-address <Agent address>
Sets the IPv4 address to be used for <Agent address> in a trap notification frame in
SNMPv1 format. Because only the SNMPv1 frame format can have the <Agent
address> field in their Trap-PDUs, the address set by using this command is applied
to SNMPv1 traps.
1. Default value when this parameter is omitted:
If this parameter is not set, the IPv4 address of the VLAN ID whose <Agent
address> value is the smallest in the trap notification frame is used.
2. Range of values:
Set an IPv4 address from
0.0.0.0 to 255.255.255.255 for <Agent address>.
dot1x-trap {failure | all}
Sets the trap type for IEEE 802.1X authentication.
failure
Only traps for an authentication failure are issued.
all
A trap is issued when authentication is successful, fails, or is canceled.
1. Default value when this parameter is omitted:
failure
2. Range of values:
failure or all
web-authentication-trap {failure | all}
Sets the trap type for Web authentication.
failure
Only traps for an authentication failure are issued.
all
A trap is issued when authentication is successful, fails, or is canceled.
1. Default value when this parameter is omitted:
failure
2. Range of values:
failure or all
mac-authentication-trap {failure | all}
Sets the trap type for MAC-based authentication.
failure
Only traps for an authentication failure are issued.
all
A trap is issued when authentication is successful, fails, or is canceled.
1. Default value when this parameter is omitted:
failure
2. Range of values: