Specifications

snmp-server traps
616
snmp-server traps
Sets the timing for issuing a trap.
Syntax
To set or change information:
snmp-server traps [{ limited-coldstart-trap |
unlimited-coldstart-trap }] [link-trap-bind-info {private |
standard} ] [agent-address
<Agent address>] [dot1x-trap {failure | all}]
[web-authentication-trap {failure | all}] [mac-authentication-trap
{failure | all}]
To delete information:
no snmp-server traps
Input mode
(config)
Parameters
{ limited-coldstart-trap | unlimited-coldstart-trap }
Limits the times when coldStart Trap is issued. The following table provides an
overview of the events that cause the
coldStart Trap set by using this parameter to
be issued.
Table 32-3 Events causing coldStart Trap to be issued for each parameter
Parameter Events
limited-coldstart-trap
 A Switch is started (the Switch is turned on).
unlimited-coldstart-trap
 A Switch is started (the Switch is turned on).
 An IP configuration is added or deleted.
 When the time is changed by using the set clock command
1. Default value when this parameter is omitted:
limited-coldstart-trap
2. Range of values:
limited-coldstart-trap or unlimited-coldstart-trap
link-trap-bind-info {private | standard}
Configures the MIB to be added when link up/down Trap is issued.
The following table describes the MIBs to be added when
link up/down Trap set by
using this parameter is issued.
Table 32-4 MIBs to be added when link up/down Trap is issued for each parameter
Parameter MIBs to be added when a link up/down trap is issued
private  (Common to SNMPv1 and SNMPv2C traps) ifIndex, ifDescr, and
ifType
standard  (For SNMPv1 traps) ifIndex
 (For SNMPv2C traps) ifIndex, ifAdminStatus, and ifOperStatus