Specifications

snmp-server location
615
snmp-server location
Sets the name of the location where the Switch is installed.
Syntax
To set or change information:
snmp-server location <Text>
To delete information:
no snmp-server location
Input mode
(config)
Parameters
<Text>
Sets the name of the location where the Switch is installed. This information can be
referenced by using the name set in
[sysLocation] of the system group for
inquiries from the SNMP manager.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Enclose a character string of no more than 60 characters in double quotation
marks ("). Specifiable characters are alphanumeric characters and special
characters. To enter a character string that does not include any special
characters such as a space, you do not need to enclose the character string in
double quotation marks ("). For details, see Any character string in Specifiable
values for parameters.
Default behavior
The initial value is null.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. To reference information about name, contact, and location from the SNMP
manager, you must use the
snmp-server community command to register the
SNMP manager.
Related commands
None