Specifications

clock timezone
38
clock timezone
Sets the time zone.
The Switch maintains the date and time internally in Coordinated Universal Time (UTC).
This clock timezone setting affects only time set using the
set clock command, and the
time displayed by using an operation command.
Syntax
To set or change information:
clock timezone <Zone name> <Hours offset> [<Minutes offset>]
To delete information:
no clock timezone
Input mode
(config)
Parameters
<Zone name>
Sets the name used to identify a time zone.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
A maximum of seven alphanumeric characters
(It is possible to enter other characters, but use only the characters mentioned
above.)
<Hours offset>
Sets an offset in hours from UTC in decimal.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
-12 to -1, 0, 1 to 12
<Minutes offset>
Sets an offset in minutes from UTC.
1. Default value when this parameter is omitted:
0
2. Range of values:
0 to 59 in decimal
Default behavior
UTC is used.
Impact on communication
None