Specifications

rmon alarm
601
Notes
1. To access an alarm group from the SNMP manager, you must register the SNMP
manager by using the
snmp-server community command.
2. As the value for
rising-event-index or falling-event-index of an alarm group,
set the information identification number that has been set for the corresponding
event group.
3. When setting this command from a console, you must use an object name. If you
use an object ID for setting this command from the SNMP manager, and you execute
the
show running-config operation command on the console, the object name is
displayed.
Related commands
snmp-server host
rmon event