Specifications

rmon alarm
597
rmon alarm
Sets the control information for the RMON (RFC 1757) alarm group. This command can
configure a maximum of 128 entries.
Syntax
To set or change information:
rmon alarm <Number> <Variable> <Interval> {delta | absolute}
rising-threshold
<Value> rising-event-index <Event#> falling-threshold
<Value> falling-event-index <Event#> [owner <Owner string>]
[ startup-alarm { rising-falling | rising | falling } ]
To delete information:
no rmon alarm <Number>
Input mode
(config)
Parameters
<Number>
Sets the information identification number for the RMON alarm group control
information. This parameter is equivalent to
alarmIndex defined in RFC 1757.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
1 to 65535
<Variable>
Sets the object identifier for the MIB used for checking the threshold. This parameter
is equivalent to
alarmVariable defined in RFC 1757.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Enclose a MIB object identifier (in dot format) in double quotation marks (").
Only the object identifiers listed below that can be set in no more than 63
characters are valid.
If an input character string contains only alphanumeric characters and periods
(.), you do not have to enclose the character string in double quotation marks
(").
- Object name
See Table 32-1 The setting range of object identifiers subject to alarm
monitoring.
- Instance number
x in Table 32-1 The setting range of object identifiers subject to alarm
monitoring is the instance number, which sets
ifIndex of the MIB. For
details about the ifIndex range, see the manual MIB Reference.