Specifications

ma vlan-group
593
ma vlan-group
Sets the VLAN belonging to the MA used in the applicable domain.
Syntax
To set or change information:
ma <No.> vlan-group <VLAN ID List> [primary-vlan <VLAN ID>]
To delete information:
no ma <No.> vlan-group
Input mode
(config-ether-cfm)
Parameters
<No.>
Sets the MA ID number.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 65535
<VLAN ID List>
Sets the VLANs to be used in the applicable MA.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
For details about how to set <VLAN ID List> and the specifiable values, see
Specifiable values for parameters.
primary-vlan <VLAN ID>
Sets the primary VLAN to be used when CFM PDUs are sent in the applicable MA.
1. Default value when this parameter is omitted:
From the VLAN list specified by using
vlan-group <VLAN ID List>, a
lower-numbered VLAN is used as the primary VLAN.
2. Range of values:
1 to 4094
3. Note on using this parameter:
Specify the VLAN IDs that were specified by using vlan-group <VLAN ID List>.
Default behavior
None
Impact on communication
None