Specifications

ma name
591
ma name
Sets the name of an MA to be used in the applicable domain.
Syntax
To set or change information:
ma <No.> name {str <Strings> | vlan <VLAN ID>}
To delete information:
no ma <No.> name
Input mode
(config-ether-cfm)
Parameters
<No.>
Sets the MA ID number.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
0 to 65535
{str <Strings> | vlan <VLAN ID>}
Specifies the name of an MA by using a character string or a VLAN ID.
str <Strings>
A character string specified for <Strings> is used for the name of an MA.
vlan <VLAN ID>
The VLAN ID specified for <VLAN ID> is used as the name of the MA.
1. Default value when this parameter is omitted:
This parameter cannot be omitted.
2. Range of values:
Specify a character string that is no more than 45 characters for <Strings>. For
details about the characters that can be specified, see Specifiable values for
parameters.
Specify a value from 1 to 4094 for <VLAN ID>.
3. Note on using this parameter:
- If a parameter other than
no-present has been set by using the domain
name command and you specify a character string that is 44 characters or
more for <Strings>, the 44th and subsequent characters are not used in the
Short MA Name field in the CCM.
- <Strings> or <VLAN ID> that has already been set in the same domain
cannot be set.
Default behavior
<No.> of the ma vlan-group command is used for a name of an MA.